PENGARUH SUHU DAN LAJU ALIR UDARA PENGERING PADA PENGERINGAN KARAGINAN MENGGUNAKAN TEKNOLOGI SPRAY DRYER
Abstract
Carrageenan, as one of the treatment of seaweed, is very
important role in food and beverage industry, pharmaceuticals, and
others. The low quality of carrageenan in the state due to the less
accurate drying system which is used as the final materials handling
unit (finishing product).
The method of spray dryer is drying the liquid
by contacting the liquid droplets in the opposite direction or the
direction of hot air. Humidity can be reduced by passing the air in the
adsorbent column that will absorb moisture in it before entering the
furnace room.
Carrageenan with a spray drying process using zeolite as
an absorbent of moisture is an alternative option to achieve an
effective hot air. Variable used in this research was the temperature
change of air for drying (70°C, 80oC, 90oC, 100oC)
and a flow rate of air dryers (11 m / sec, 12 m / sec, 13 m / sec, 14 m
/ sec).
The results showed that water content carrageenan products
affected by temperature and air velocity dryer into the column.
Carrageenan results with the lowest water content of 11.19% is achieved
on the process conditions with a temperature of 100oC column
with drying air velocity 14 m / sec.
In addition, the heat transfer
process (based on temperature) is more affected than the mass transfer
processes of momentum transfer (based on drying air flow rate). As well,
the efficiency of the drying process the product increases with
increasing drying temperature and air velocity.
The efficiency of the
drying process the product for 83.33% carrageenan obtained at 100oC temperature conditions and the drying air velocity 14 m/sec.
Sumber : http://www.ejournal-s1.undip.ac.id/index.php/jtki/article/view/941
Tidak ada komentar:
Posting Komentar